Hey, guys, are you taking the Cisco CCNP 300-710 SNCF exam? As most of you may have noticed, no effective way has been found for this exam to pass. Here I will share the best and most effective way to pass the 300-710 exam. I hope you can continue to read.
You are looking for excellent quality 300-710 research materials and you should choose Pass4itSure 300-710 dumps. Their auxiliary guides are as awesome and clear as crystals. You are familiar with the subtleties in a very calm way. In a short period of time, you can choose to prepare for the 300-710 SNCF exam. Here’s the connection: https://www.pass4itsure.com/300-710.html (PDF + VCE ) you have to choose!
Download Cisco 300-710 SNCF exam PDF
Free Cisco 300-710 SNCF exam PDF https://drive.google.com/file/d/1A8OqsP6FA7UqxWLBntPBzJki3yhSWpWj/view?usp=sharing
Cisco 300-710 PDF lets you learn at any time. Of course, it’s not complete, and for complete, Pass4itSure dumps are the perfect choice for you.
Cisco 300-710 practice test some online exercises
Cisco 300-710 exam practice questions and answers come from Pass4itSure and share a part for free.
QUESTION 1 #
Refer to the exhibit. What must be done to fix access to this website while preventing the same communication to all
other websites?
A. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1 50.
B. Create an access control policy rule to allow port 80 to only 172.1.1 50.
C. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50
D. Create an access control policy rule to allow port 443 to only 172.1.1 50
Correct Answer: B
QUESTION 2 #
An engineer is restoring a Cisco FTD configuration from a remote backup using the command restore remote-manager backup location 1.1.1.1 admin /volume/home/admin BACKUP_Cisc394602314.zip on a Cisco FMG. After connecting to
the repository, an error occurred that prevents the FTD device from accepting the backup file. What is the problem?
A. The backup file is not in .cfg format.
B. The backup file is too large for the Cisco FTD device
C. The backup file extension was changed from .tar to .zip
D. The backup file was not enabled prior to being applied
Correct Answer: C
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSEC-3455.pdf
QUESTION 3 #
A network administrator notices that inspection has been interrupted on all non-managed interfaces of a device. What is the cause of this?
A. The value of the highest MTU assigned to any non-management interface was changed.
B. The value of the highest MSS assigned to any non-management interface was changed.
C. A passive interface was associated with a security zone.
D. Multiple inline interface pairs were added to the same inline interface.
Correct Answer: A
QUESTION 4 #
Which function is the primary function of the Cisco AMP threat Grid?
A. automated email encryption
B. applying a real-time URI blacklist
C. automated malware analysis
D. monitoring network traffic
Correct Answer: C
QUESTION 5 #
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface. What
must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
A. The output format option for the packet logs is unavailable.
B. Only the UDP packet type is supported.
C. The destination MAC address is optional if a VLAN ID value is entered.
D. The VLAN ID and destination MAC address are optional.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/troubleshooting_the_system.html
QUESTION 6 #
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
A. system generate-troubleshoot
B. show configuration session
C. show managers
D. show running-config | include manager
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepo
wer_Threat_Defense/c_3.html
QUESTION 7 #
An organization has implemented Cisco Firepower without IPS capabilities and now wants to enable inspection for their traffic. They need to be able to detect protocol anomalies and utilize the Snort rule sets to detect malicious behavior.
How is this accomplished?
A. Modify the network discovery policy to detect new hosts to inspect.
B. Modify the access control policy to redirect interesting traffic to the engine.
C. Modify the intrusion policy to determine the minimum severity of an event to inspect.
D. Modify the network analysis policy to process the packets for inspection.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdmintrusion.html
QUESTION 8 #
An organization has a Cisco FTD that uses bridge groups to pass traffic from the inside interfaces to the outside
interfaces. They are unable to gather information about neighboring Cisco devices or use multicast in their
environment. What must be done to resolve this issue?
A. Create a firewall rule to allow CDP traffic.
B. Create a bridge group with the firewall interfaces.
C. Change the firewall mode to transparent.
D. Change the firewall mode to routed.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guidev623/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
QUESTION 9 #
Which two deployment types support high availability? (Choose two.)
A. transparent
B. routed
C. clustered
D. intra-chassis multi-instance
E. virtual appliance in public cloud
Correct Answer: AB
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guidev61/firepower_threat_defense_high_availability.html
QUESTION 10 #
With a recent summertime change, system logs are showing activity that occurred to be an hour behind real-time.
Which action should be taken to resolve this issue?
A. Manually adjust the time to the correct hour on all managed devices.
B. Configure the system clock settings to use NTP with Daylight Savings checked.
C. Configure the system clock settings to use NTP.
D. Manually adjust the time to the correct hour on the Cisco FMC.
Correct Answer: B
QUESTION 11 #
An engineer must build redundancy into the network and traffic must continuously flow if a redundant switch in front of the firewall goes down. What must be configured to accomplish this task?
A. redundant interfaces on the firewall cluster mode and switches
B. redundant interfaces on the firewall non-cluster mode and switches
C. vPC on the switches to the interface mode on the firewall duster
D. vPC on the switches to the span EtherChannel on the firewall cluster
Correct Answer: D
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKSEC-2020.pdf
QUESTION 12 #
An engineer is monitoring network traffic from their sales and product development departments, which are on two
separate networks. What must be configured in order to maintain data privacy for both departments?
A. Use passive IDS ports for both departments.
B. Use a dedicated IPS inline set for each department to maintain traffic separation.
C. Use 802.1Q inline set Trunk interfaces with VLANs to maintain logical traffic separation.
D. Use one pair of inline sets in TAP mode for both departments.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guidev64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
QUESTION 13 #
With Cisco Firepower Threat Defense software, which interface mode do you configure for an IPS deployment, where
traffic passes through the appliance but does not require VLAN rewriting?
A. inline set
B. passive
C. inline tap
D. routed
E. transparent
Correct Answer: D
Looking for information on which 300-710 exams might be easier to help prepare for the exam and people’s recent experience with the 300-710 exam preparation that has been quite successful. Then you have come to the right place. I tell you, Pass4itSure 300-710 dump is the best way to prepare, study hard, 100% success! Get the latest 300-710 dumps https://www.pass4itsure.com/300-710.html (Q&As: 180).
